Flexible Wall Panels

The Interior Decor Range includes a fantastic array of products to reinvent your space, including wall mouldings, coving, skirting boards, wall panelling, ceiling rose's and more.

Designed in Belgium and manufactured in Europe, the 50 year old brand are commited to becoming carbon neutral in 2023 and to have a strong positive impact on the environment by 2035.

The high degree of finishing, excellent service and a lifetime product warranty* ensure a worry-free result.

Whether you are interested in contemporary or traditional interiors, there is a range to suit your style.

Purotouch is a high-quality, high-density polyurethane that allows for fine design details and a sharp finish. The material is lightweight, water resistant and cuts just like wood.

Designed in Belgium and manufactured in Europe, the brand are commited to becoming carbon neutral in 2023 and to have a strong positive impact on the environment by 2035.

Currently the products are produced from long life polyurethane, which is not recyclable.  However, all the materials used to trim out the panelling are recyclable.

The manufacturers have conformed to certification no: EN ISO 14001 since 2010, and at that point also invested in a large solar power plant, and a recycling unit. They operate in an environmentally responsible way, and in compliance with all relevant environmental EU legislation.  This reflects in all aspects of the materials and energy management.

Positive Investments

In 2020 the manufacturer spent 800,000 Euros adding to their solar power energy production by filling the acres around the factory with solar panels, which work alongside the solar panels on the factory roof.

Ongoing Commitments

+ Reduce usage of all kinds of waste, and maximise re-use of internal waste.

+ Strive to maximise the use of eco-friendly products and materials.

+ Reduce energy consumption by improving internal work procedures and smart capital expenditure.

Why choose Purotouch over other materials?

Many wooden products are prepared with harmful toxic chemicals, and MDF has known carcinogenic properties.

The plaster industry requires very large quanities of natural resources every year to produce products from.

Easy Installation

The products are lightweight and installed using adhesive making installation easy, simple and quick.

Easy to cut

The material cuts just like wood which means you can cut all the products to the exact sizes that you need onsite.

Ready to paint

The products arrives pre-primed in white, ready for you to paint. Once installed you can either paint the mouldings by hand or with a spray gun.

Water Resistant

The material is water resistant, which means the products can be used in areas with high moisture such as bathrooms or damp areas.

Preperation

When your products arrive, unpack them and lay them out on the floor so you can check you have enough for your project. Store the products and adhesives at room temperature and wait 24 hours before installing

Sand down any obvious imperfections on your wall/surface and wipe down the surface after making sure it is free from dust.

Before you start fitting ensure that the walls are dry and grease free.

Mark Up

Plan out and mark up the location of where you want to fit the moulding/panelling onto the wall using a spirit level.

If you are installing a skirting board, always start with this. Always start your project from the bottom of the wall upwards.

Cutting

The material cuts just like wood, so once you have measured up, simply cut your moulding/panelling with a fresh bladed saw.

Glueing Up

Apply the DecoFix Power adhesive to the rear face of your moulding/panelling making sure to run a bead of adhesive along the length if you are using a moulding or for larger mouldings/panels all around the perimetre and a bead down the center aswell.

Fitting

Line up the moulding/panel against the wall, press firmly and remove any excess glue with a cloth or sponge.

If you are fitting items side by side make sure you are using the correct adhesive - see all adhesive products

*Make sure you leave a 1mm expansion gap around panels.

Finishing

Use the DecoFix Filler to smooth out any joints using a application gun along the joins. Use your finger or a lightly damp sponge to smooth out the filler along the join or seam. If you are using vertical wall panels run the filler along all the vertical seams and use a damp sponge to smooth the filler in an upward direction.

Wait 15 minutes and then gently sand any areas that you think need sanding a little.

Painting

Now your mouldings or panels have been installed you can paint them, either by hand or with a spray gun.

Once your mouldings or panels have been installed you can paint them, either by hand or with a spray gun.