Exterior Dentil House Moulding | TF05

£44.04

The external dentil TF05 is a sculpted design dentil usually installed at eaves level on executive homes the design is built to mimic detailing from the Victorian era.

The plain inlay detail on the TF05 also lends itself to installation beneath shallow projection door canopies. 
Each TF05 dentil is manufactured in a tough polyurethane material and supplied in a pre-finished white. These are usually installed with the 135mm section against the wall and the 255mm length projecting along the underside of the soffit. These dentils are typically spaced at 600mm centres.

To achieve an architectural balance we recommend using the TF04 dentil on soffit sizes of approximately 300mm.


Benefits

+ Water resistant

+ Durable

+ Sharp detailing and smooth finish

+ All of the standard exterior products come with a 10-year warranty when fitted in accordance with installation instructions.

 

Material

Polyurethane / DuroPolymer is a light weight; easy to handle material with good 3D definition giving crisp design details. Site decoration not required which overall makes the exterior range a great and cost effective building option.

 

Dimensions

L 10cm x H 25.5cm x W 13.5cm

 

Installation

Use nails or screws during installation.
Each dentil should be fixed from above by two suitable screws (not supplied) prior to the roof being felt and battened. Retro-fitting on property refurbishments can be achieved, call us to discuss appropriate procedures.