3D Wall Panel Samples

DecoFiller - No. 300 

Attributes:

• Ready-to-use lightweight acrylic filler
• Designed for shrink-proof finishing of gaps, cracks, and irregularities
• Suitable for use between decorative profiles, walls, and ceilings
• Rapidly repaintable (after 15 minutes)
• Does not crack

Benefits:

• Easy and convenient application due to its ready-to-use formula
• Provides a smooth, shrink-proof finish for a polished look
• Quickly repaintable, allowing for fast project completion
• Durable and crack-resistant, ensuring long-lasting results

DecoFix Power - No. 700 

Attributes:

• Ultra-strong MS-polymer installation adhesive
• Suitable for heavy profiles, exterior applications, non-porous surfaces, and damp environments
• 290 ml volume
• Removable with soap solution
• Paintable after hardening (minimum 24 hours)
• Recommended to use DecoFix Ultra for joints (Purotouch and Duropolymer)

Benefits:

• Exceptional bonding strength for heavy-duty applications
• Versatile use on a variety of surfaces, including non-porous and damp environments
• Easy cleanup with soap solution
• Provides a durable and paintable surface after curing
• Ideal for both interior and exterior applications, enhancing project versatility

DecoFix Pro - No. 500 

Attributes:

• Strong installation adhesive for interior, porous, and dry surfaces
• 310 ml volume
• Water-based acrylic glue
• Long-lasting seal between mouldings and surfaces
• Removable with a humid sponge or cloth
• Frost-free storage requirement
• Paintable after hardening (minimum 24 hours)
• Recommended to use DecoFix Ultra for joints (Purotouch® and Duropolymer®)

Benefits:

• Reliable and strong adhesion for interior projects
• Suitable for porous and dry surfaces, ensuring compatibility
• Easy removal with a humid sponge or cloth for convenient adjustments
• Long-lasting seal enhances the durability of installations
• Paintable surface post-curing for seamless finishing
• Simple storage requirements, ensuring product longevity

DecoFix Ultra - No. 400 

Attributes:

• White polymer-based adhesive for joints between mouldings
• 270 ml - covers 80 metres
• Application: Apply sufficient adhesive in every joint, push profiles together, and remove excess glue with a painter's knife and soapy water before hardening
• Use DecoFiller FL300 if needed and finish with sandpaper
• Paintable after 24 hours

Benefits:

• Specially formulated for secure and seamless joints between mouldings
• Generous coverage, making it cost-effective for large projects
• Easy application process for precise and clean results
• Compatibility with DecoFiller FL300 for enhanced finishing
• Paintable surface after curing for a polished look
• Durable bond ensures long-lasting joint stability

How to Use DecoFiller - No. 300 for Installation

Preparation:

• Ensure the surfaces to be filled are clean, dry, and free of dust and grease.

Application:

• Apply the DecoFiller - No.300 directly into the gaps, cracks, or irregularities using a caulking gun or putty knife.
• Smooth the filler with a spatula or your finger to achieve a flat finish.

Finishing:

• Allow the filler to dry for about 15 minutes.
• Once dry, the filler can be painted over to match the surrounding surfaces.

1. Clean-Up:

• Clean any tools and excess filler with water before it hardens.

How to Use DecoFix Power - No. 700 for Installation

Preparation:

• Ensure the surfaces to be bonded are clean, dry, and free of dust and grease.

Application:

• Cut the nozzle of the adhesive cartridge and load it into a caulking gun.
• Apply a continuous bead of adhesive along the back of the profile or to the surface where the profile will be placed.

Installation:

• Press the profile firmly into place and hold for a few seconds to ensure good contact.
• For non-porous surfaces, exterior applications, or damp environments, ensure the adhesive is applied generously.

Curing:

• Allow the adhesive to cure for at least 24 hours before painting.

1. Clean-Up:

• Remove any excess adhesive immediately with a soap solution before it hardens.

How to Use DecoFix Pro - No. 500 for Installation

Preparation:

• Make sure the surfaces to be bonded are clean, dry, and free of dust and grease.

Application:

• Cut the nozzle of the adhesive cartridge and load it into a caulking gun.
• Apply a continuous bead of adhesive to the back of the profile or directly onto the surface.

Installation:

• Press the profile firmly against the wall or ceiling.
• Hold the profile in place for a few seconds to ensure a secure bond.

Curing:

• Allow the adhesive to cure for at least 24 hours before painting.

Clean-Up:

• Clean any excess adhesive with a humid sponge or cloth before it hardens.

1. Storage:

• Keep the adhesive in a frost-free environment to maintain its quality.

How to Use DecoFix Ultra - No. 400 for Installation

Preparation:

• Ensure the surfaces and profiles are clean, dry, and free of dust and grease.

Application:

• Cut the nozzle of the adhesive cartridge and load it into a caulking gun.
• Apply a sufficient amount of DecoFix Ultra into every joint.

Installation:

• Push the profiles firmly together to ensure a tight joint.
• Remove any excess adhesive immediately with a painter's knife and soapy water before it hardens.

Finishing:

• If necessary, use DecoFiller - No. 300  to fill any remaining gaps or imperfections.
• Once the adhesive is fully cured (after 24 hours), sand the joints lightly if needed and then paint.

1. Clean-Up:

• Clean any tools and excess adhesive with soapy water before it hardens.

DecoFiller No. 300 is a ready-to-use lightweight acrylic filler designed for shrink-proof finishing of gaps between decorative profiles, walls, ceilings, and for filling cracks and irregularities on profiles or walls.

DecoFiller - No. 300 can be repainted rapidly after just 15 minutes.

No, DecoFiller - No. 300 is formulated to be crack-resistant after application.

DecoFix Power - No. 700 is an ultra-strong MS-polymer installation adhesive suitable for heavy profiles, exterior applications, non-porous surfaces (such as tiles and glass), and damp environments.

Excess DecoFix Power - No. 700 should be removed with a soap solution.

DecoFix Power - No. 700 can be painted after it has hardened, which takes a minimum of 24 hours.

For joints with Purotouch and Duropolymer, it is recommended to use DecoFix Ultra.

DecoFix Pro - No. 500 is ideal for interior, porous, and dry surfaces.

DecoFix Pro - No. 500 is a strong, water-based acrylic glue.

Excess DecoFix Pro - No. 500 can be removed with a humid sponge or cloth.

DecoFix Pro - No. 500 should be kept frost-free.

DecoFix Pro - No. 500 can be painted after it has hardened, which takes a minimum of 24 hours.

For joints with Purotouch and Duropolymer, DecoFix Ultra is recommended.

DecoFix Ultra - No. 400 is a white polymer-based adhesive used for joints between mouldings.

A 270 ml tube of DecoFix Ultra - No. 400 provides coverage for approximately 80 metres of joints.

Apply sufficient DecoFix Ultra - No. 400 in every joint, push profiles strongly against each other, and remove excess glue with a painter's knife and soapy water before it hardens.

Yes, DecoFix Ultra - No. 400 can be painted after 24 hours.

If additional finishing is needed, use DecoFiller - No. 300 and finish with sandpaper.