Exterior Dentil House Moulding | TF02


The external dentil TF02 is a compact dentil suitable for use on eaves details with a minimum soffit size of 150mm or over. This dentil is usually installed at eaves level on luxury homes being built to mimic Victorian detailing. 

These are usually installed with the 120mm section against the wall and the 105mm length projecting along the underside of the soffit. TF02 dentils are typically spaced at 600mm centres, but existing dwellings may dictate otherwise. In some regions dentils may have originally been fitted in a "hit and miss" pattern. In effect there would be one dentil, a 3 inch (75mm) gap to the next one and so on around the entire building.


+ Water resistant

+ Durable

+ Sharp detailing and smooth finish

+ All of the standard exterior products come with a 10-year warranty when fitted in accordance with installation instructions.



Polyurethane / DuroPolymer is a light weight; easy to handle material with good 3D definition giving crisp design details. Site decoration not required which overall makes the exterior range a great and cost effective building option.



L 7.7cm x H 10.5cm x W 12cm



Use nails or screws during installation.
Each dentil should be fixed from above using a suitable screw (not supplied) prior to the roof being felt and battened. Retro-fitting on PVCu soffits can be achieved by using super glue and activator.