Decorative Corner Block | Door Moulding | No.200 | 9.6cm x 9.6cm
Colour: White primed and ready for painting
Material: Purotouch
Description
9.6cm x 9.6cm x 3cm
The No.200 Corner Block is a simple but decorative corner block with a square beaded detail, getting shallower at the centre. Its clean, geometric lines create a crisp and polished look that complements various interior styles, from classic to contemporary. Specifically designed to pair harmoniously with the door architraves in the range, this corner block allows you to create a subtle and decorative door frame that exudes character and style.
One of the standout advantages of using a corner block is its ability to eliminate the need for awkward mitre cuts. This design element not only streamlines the installation but also saves you valuable time and effort. It's a solution that's particularly appreciated by DIY enthusiasts and professionals alike.
We recommend: Pairing No.200 with door moulding architraves, No.119 or No.121 for a beautiful result. Other recommended interior mouldings to considered include, adding plinth block No.310 for a sophisticated design.
Similar Styles: No.210
Perfect Coving For: Doorways, Alcoves, Windows
Purotouch is a high-quality, high-density polyurethane that allows for fine design details and a sharp finish. The material is lightweight, water resistant and cuts just like wood.
£30 for delivery
The Interior Decor Range includes a fantastic array of products to reinvent your space, including wall mouldings, coving, skirting boards, wall panelling, ceiling rose's and more.
Designed in Belgium and manufactured in Europe, the 50 year old brand are commited to becoming carbon neutral in 2023 and
to have a strong positive impact on the environment by 2035.
The high degree of finishing, excellent service and a lifetime product warranty* ensure a worry-free result.
Whether you are interested in contemporary or traditional interiors, there is a range to suit your style.
Designed in Belgium and manufactured in Europe, the brand are commited to becoming carbon neutral in 2023 and to have a strong positive impact on the environment by 2035.
Currently the products are produced from long life polyurethane, which is not recyclable. However, all the materials used to trim out the panelling are recyclable.
The manufacturers have conformed to certification no: EN ISO 14001 since 2010, and at that point also invested in a large solar power plant, and a recycling unit. They operate in an environmentally responsible way, and in compliance with all relevant environmental EU legislation. This reflects in all aspects of the materials and energy management.
Positive Investments
In 2020 the manufacturer spent 800,000 Euros adding to their solar power energy production by filling the acres around the factory with solar panels, which work alongside the solar panels on the factory roof.
Ongoing Commitments
+ Reduce usage of all kinds of waste, and maximise re-use of internal waste.
+ Strive to maximise the use of eco-friendly products and materials.
+ Reduce energy consumption by improving internal work procedures and smart capital expenditure.
Why choose Purotouch over other materials?
Many wooden products are prepared with harmful toxic chemicals, and MDF has known carcinogenic properties.
The plaster industry requires very large quanities of natural resources every year to produce products from.
There is generally a good stock of the interior decor products within the UK which means delivery will be 2-3 days. Occasionally items may be out of stock, especially popular items such as wall panels. Items that are out of stock have a delivery lead-time of 2-3 weeks. If there are any items on your order that are out of stock will get in touch straight away to let you know. You can then either decide to continue with your order and wait, or request a refund.
If you change your mind about your purchase and no longer
want your goods, you have 14 days to let us know. (*Unless the goods are made to order or custom made) The 14 days starts from the day your order has been delivered to you. You need to contact us by email to let us know you would like to start a return and we will advise you on the steps that need to be taken. You will be responsible for returning the goods within 5 days of your request to return. Once the goods have been received back at the warehouse, they will be checked and if the goods are free from damage and without any signs of use, your refund will be issued within the following 14 days.
If you would like to place a *large order for delivery outside of the UK please send us an email with your full delivery address and details of what you would like to order. We can then generate a quotation for you.
*minimum order spent of £4000.
Product Information
Benefits & Attributes
Easy Installation
The products are lightweight and installed using adhesive making installation easy, simple and quick.
Easy to cut
The material cuts just like wood which means you can cut all the products to the exact sizes that you need onsite.
Ready to paint
The products arrives pre-primed in white, ready for you to paint. Once installed you can either paint the mouldings by hand or with a spray gun.
Water Resistant
The material is water resistant, which means the products can be used in areas with high moisture such as bathrooms or damp areas.
Installation Information
Preperation
When your products arrive, unpack them and lay them out on the floor so you can check you have enough for your project. Store the products and adhesives at room temperature and wait 24 hours before installing
Sand down any obvious imperfections on your wall/surface and wipe down the surface after making sure it is free from dust.
Before you start fitting ensure that the walls are dry and grease free.
Mark Up
Plan out and mark up the location of where you want to fit the moulding/panelling onto the wall using a spirit level.
If you are installing a skirting board, always start with this. Always start your project from the bottom of the wall upwards.
Cutting
The material cuts just like wood, so once you have measured up, simply cut your moulding/panelling with a fresh bladed saw.
Glueing Up
Apply the DecoFix Power adhesive to the rear face of your moulding/panelling making sure to run a bead of adhesive along the length if you are using a moulding or for larger mouldings/panels all around the perimetre and a bead down the center aswell.
Fitting
Line up the moulding/panel against the wall, press firmly and remove any excess glue with a cloth or sponge.
If you are fitting items side by side make sure you are using the correct adhesive - see all adhesive products
*Make sure you leave a 1mm expansion gap around panels.
Finishing
Use the DecoFix Filler to smooth out any joints using a application gun along the joins. Use your finger or a lightly damp sponge to smooth out the filler along the join or seam. If you are using vertical wall panels run the filler along all the vertical seams and use a damp sponge to smooth the filler in an upward direction.
Wait 15 minutes and then gently sand any areas that you think need sanding a little.
Painting
Now your mouldings or panels have been installed you can paint them, either by hand or with a spray gun. We recommend using Myland Wood & Metal paint for the most durable finish.
Painting & Finishing
Once your mouldings or panels have been installed you can paint them, either by hand or with a spray gun.
We recommend using Mylands Wood & Metal Paint which are good for both interior and exterior and come in three different finishes: Matt, Eggshell or Gloss. Extremely durable with a high quality finish in each category, the Wood & Metal paint is unparalleled in terms of its performance: scrubbable, sprayable and durable it is perfect for high traffic areas.
F.A.Q | Interior Decor Range
How much do I need to order?
How much product you need will depend on your project, your walls and which products you are purchasing.
How to measure for Coving or Skirting:
Measure and note down the overall lengths of each of your walls. (Removing gaps from the measurements such as doors if you are ordering skirting) The coving profiles are sold in 2metre lengths. You can either add up all the wall lengths into one total, then divide by 2 to figure out the total number of profiles you need to order. Alternatively and if you want fewer joints in your coving/skirting, you can look at each length of wall and work out how many 2metre lengths will fit in the space. If you do it this way you may end up with more wastage.
Tip - Make sure to add a little bit extra to your order incase you make any mistakes with cutting!
How to measure for Contemporary Wall Panels
These panels come in standard 200cm x 25cm sizes. Generally these will be fitted side by side to fill a wall or area. Measure the overall width you want to cover (in cm) and divde by 25cm (which is the panel width) This will tell you how many panels you require.
Alternatively, you can work out how many panels you need by measuring your overall square meterage required. x2 panels = 1msq. Therefore if you have a wall of 12msq that you want to cover, times that figure by x2 and that will give you the total number of panels.
Tip - Always add a little bit extra to your order incase you make any mistakes with cutting!
If you need any help with your order please get in touch and we would be delighted to help.
How do I prepare my surfaces?
Sand down any obvious imperfections on your wall/surface and wipe down the surface after making sure it is free from dust.
Before you start fitting ensure that the walls are dry and grease free.
Installing over a painted surface
*If your existing surface is painted, it is very important that the paint has a clean, dry and non-greasy surface. It goes without saying that the paint adhesion must be good. It is important to always sand off any remaining dirt and loose paint.
Installing over wallpaper
It is best to remove the wallpaper before you install the products. If necessary, you can cut and remove the relevant sections. If this is not possible, use DecoFix Power as the glue to affix the products.
How do I cut the product?
The Purotouch material of the mouldings and panels cuts just like wood. For best results it is recommended to use a fresh-bladed saw or similar cutting tool when cutting the product.
How do I install the product?
All of the products are to be fitted to your surface using adhesive glue.
There are three adhesives that are recommended which have different uses. Please see the below question about adhesives for details about which ones you should choose for your application.
Please see the recommended adhesives here.
What adhesive do I need?
We recommend purchasing the correct adhesives for your project from our website. The adhesives have been designed to work specifically with the moulding and panelling products.
DecoFix Ultra - No.400
This adhesive is a go-to choice for professionals and DIY enthusiasts alike, as it offers strong bonding capabilities, ease of use, and a long-lasting hold. Whether you're working on intricate interior moldings, decorative elements, or any other home improvement project, DecoFix Ultra - No.400 is the dependable adhesive that ensures your work stays securely in place while maintaining a clean, professional finish. Its superior performance makes it a top choice for anyone seeking to elevate their interior decor and renovation projects.
Deco Filler
This lightweight acrylic filler is perfect for finishing seams, for example, along the long edge between panels. Note that long edges of panels do not need to be glued.
If you want a full gurantee from the manufacture then you will need to use the branded adhesives to fit the panelling.
What paint should I use?
We recommend using Mylands Wood & Metal Paint which are good for both interior and exterior and come in three different finishes: Matt, Eggshell or Gloss. Extremely durable with a high quality finish in each category, the Wood & Metal paint is unparalleled in terms of its performance: scrubbable, sprayable and durable it is perfect for high traffic areas.
Can you use the panels/moulding in the bathroom?
The panels and mouldings are made from polyurethane which means they are water-proof by nature.
Please note that although the product itself is water-proof, you will need to consider how you are going to finish/paint the panels or mouldings, especially if you intend on using them as shower panels or in very wet areas.
We recommend using Mylands Wood & Metal Paint which is extremely durable, scrubbable and sprayable. With over 160 different colours to choose from, you will find the perfect colour. Alternatively you could have a PU sprayed finish applied by a professional decorator.
We also highly advise that you request a sample from us so you can test the material with your chosen finishing technique. To request a sample please Contact us.
Do the panels come in different colours?
The panels and moulding all come in a white primed finish. This allows you to install your products and then paint them your desired colour once fitted. We recommended ordering paint from our range of Mylands paint which includes over 160 paint colours. Once you find the perfect colour you can order the paint at the same time as your mouldings or panels.
What does Flexible mean?
Walls and homes are not always perfectly square or straight, especially period properties and that is why flex was created.
Some of the products are available in this flexible version which means that the product is bendable around a curve, or you can bend the linear products into interesting shapes.
See the full flex range here.
The flex collection includes coving, cornice, wall panelling, wall mouldings and skirting boards which are all available in a flexible versions.
Are the products suitable for commercial use?
All of the wall panel products are used throughout Europe in commercial projects such as hotels, bars and restaurants so they are perfectly suitable for commercial use.
It is important to note that the interior moulding products are not fire retardant.
Please see the question below regarding the products and fire ratings.
Are the moulding products fire rated? Is there a fire rating?
The interior mouldings and panels do not have a fire rating but can withstand heat up to 70°C (158°F). If you wanted the panels to achieve the UK equivalent to Class 1 fire rating you would need to paint/coat the panels with intumescent paint on all the surfaces.
All of the interior decor moulding are Fire standard E. This means the product can burn, will continue burning and will not automatically stop burning.
If you are ordering a very large quantity of product the manufacturer can offer a service to apply a fire retardant coating at the factory. Please note there is a minimum order quantity and the price will be 25% higher and result in a longer lead-time.
Please contact us for more information. Click here to download the fire certificate.
